After brewing, remove the spent leaves, rinse your teapot with plain warm water and leave the body and lid apart until both are dry. A simple routine makes the pot easier to care for and avoids leaving wet leaves inside between sessions.
This guide covers everyday care for a plain, unglazed Yixing teapot. Glazed interiors, painted surfaces, metal fittings and applied decoration may need different treatment. Follow the maker’s instructions whenever they differ from general advice.
Let the pot cool gradually
Finish pouring out the tea, then allow the pot to become comfortable to handle. Support it securely while removing the lid. A wet lid can slip, and a delicate knob or handle deserves the same care as the body.
Avoid putting a hot pot under cold running water or setting it on a very cold surface. Use warm water for rinsing and let temperature changes happen gradually. There is no need to force the pot to cool so that you can put it away immediately.
Remove the leaves without scraping the clay
Tip the leaves into a waste container or compost bowl. If leaves remain near the base or behind the spout filter, add a little warm water, swirl gently and empty the pot again. Repeat as needed.
Do not push a metal implement through the spout or scrape the inside to dislodge a stubborn leaf. A narrow passage or small filter hole can be difficult to reach without damaging it. Gentle rinsing is preferable to forcing a tool into the opening.
Empty the pot after each session rather than leaving damp leaves inside until the next day. Check beneath the lid and around its rim as well as inside the body.
Rinse gently with plain water
Rinse the interior, lid and spout with plain warm water. Turn the pot carefully so that water can pass through the spout, then drain it completely. Keep your grip secure without squeezing a delicate handle or gripping the lid by its knob alone.
For this everyday routine, keep washing-up liquid, scented cleaners, abrasive powders and cleaning sprays away from the pot. Avoid the dishwasher and abrasive scouring pads. If a mark remains after gentle rinsing, ask the maker how to treat it rather than testing a stronger cleaner.
Do not boil the pot as a routine cleaning step. A general care guide cannot establish whether a particular piece, decoration or repair will tolerate that treatment.
Leave the lid off until everything is dry
Drain the body thoroughly and place it on a clean, stable surface with good airflow. Put the lid beside it where it cannot roll or fall. If you use a cloth underneath, make sure the cloth is clean and dry.
A quick wipe of the exterior does not mean that the inside, lid rim and spout are ready for storage. Leave the pieces apart until all accessible surfaces are dry. Drying time varies with the pot’s shape and the conditions in the room, so use their condition rather than a fixed number of hours.
Once dry, store the teapot somewhere clean and ventilated. Avoid closing a damp pot inside a box, display case or cupboard.
A check before putting it away
- All spent leaves have been removed.
- The body, lid and spout have been rinsed and drained.
- No cleaner or fragrance has been used.
- The body and lid are fully dry before enclosed storage.
- Any persistent odor, visible mold or damage has been set aside for advice from the maker.
If an odor persists or you see mold, stop using the pot and seek advice about that specific piece. Avoid improvised bleach, oven or boiling treatments.
For help understanding a listing, read our buying FAQs or contact Yueyang Teaware. If you are choosing a pot, our first Yixing teapot guide explains the capacity, clay and craftsmanship details to compare.