Clay teapot on a small wooden stand in a tea-tray arrangement.

What size teapot do you need for gongfu tea?

Choose your teapot size from the amount of tea you want to serve in each round. The capacity printed on a listing is a useful starting point, but it does not tell you exactly how much brewed tea will reach your cups. Leaves occupy space and retain water, and a little liquid may remain in the pot after pouring.

Before comparing teapots, measure the cups you actually use. That gives you a practical target for each infusion.

Start with a comfortable cup serving

Fill a cup with room-temperature water to your normal drinking level. Leave the same space below the rim that you would when serving tea. Measure that water in a graduated jug, or place the empty cup on a kitchen scale, tare it to zero, then add the water.

For this practical measurement, one gram of room-temperature water is approximately one millilitre. A scale reading of about 30 grams therefore represents roughly a 30ml serving. This is a household estimate, rather than a laboratory measurement.

Worked example using a 30ml serving per person
People drinking Tea needed per round
One About 30ml
Two About 60ml
Three About 90ml

These figures describe the tea you want to pour. If your usual serving is larger, repeat the calculation with your own cup measurement.

Listed capacity and usable pour are different

A listed capacity might describe a pot filled near the rim, or a more conservative working fill. Unless the listing explains the measurement, do not assume that two pots marked 150ml were measured in exactly the same way.

Once you add leaves, the available water space changes again. The amount of leaf, its shape and how it opens during brewing all matter. There is no single percentage you can subtract from every teapot to calculate its usable tea volume.

Measure the pour from a pot you already own

A familiar teapot provides a useful reference when shopping for another size. Try this simple check with a cool pot and plain, room-temperature water:

  1. Place an empty receiving cup or jug on a kitchen scale and tare it to zero.
  2. Fill the empty teapot to the level you would normally use. Avoid filling above its comfortable working level.
  3. Pour into the receiving vessel as you normally would, allowing the pot to drain.
  4. Read the water weight. Its approximate millilitre equivalent gives you an empty-pot pour measurement.

Repeat once to see whether your result is consistent. During a later tea session, notice whether the brewed pour comfortably serves your cups. The empty-pot test helps you compare vessels; it does not account for leaves.

How to compare 120ml, 150ml, 220ml and 300ml

Consider these hypothetical listed capacities as comparison points, rather than fixed recommendations for particular guest counts. A 120ml or 150ml pot may suit someone serving small cups, but the useful pour still depends on the working fill and the leaves inside.

A 220ml or 300ml pot gives you more listed volume to consider when serving larger cups or more people. It also means that a full infusion may produce more tea than a smaller group wants in one round.

If you often brew for different numbers of people, think about your most frequent session first. You can experiment with a partial fill, but check that it suits the pot and your brewing routine rather than assuming every size works equally well at every fill level.

Check the measurement before choosing

When browsing available teapots, compare capacity alongside the pot’s dimensions and form. If the measurement method is unclear, ask about its working capacity before ordering.

For a broader look at clay, form and craftsmanship, read our guide to choosing your first Yixing teapot.

Back to blog

Leave a comment